[Misc] Sharp MX M363 Sharp OSA MX-AMX 1,2 & 3

[Doug James]

I have a Sharp MX M363 that I am selling to a customer. This customer is a trial Lawyer and wants the scan numbering system that works through

Sharpdesk (Sometimes referred to as "Bates Numbering"). The Software is listed as an option as 3 different part numbers. MX-AMX (1 thru 3) Will I

need to get all of these to make the numbering system work and also purchase Sharpdesk. Any help is so much appreciated Thanks !!!

[Toner Boy]

Re: Sharp MX M363 Sharp OSA MX-AMX 1,2 & 3

I believe you will need a third party application like Drivve or similar to do the Bates stamping they require. It will require the MX-AMX2 installed (which should be standard on that model 'ACM' Application Communication Module) to function with the software. You may be able to get a trial version of the software from various companies, check the web. Here is a link I found, you should try and contact them to verify which module is required.

http://www.copeco.com/software_6_522313863.pdf

Go to Drivve and search 'Bates numbering'