[CQ] arm355n

[foudl]

test.pdf

I have bad cq when using duplex, the lines on b side seems thicker, which adjustment should i use to get the image clear, the cis is clean.

[ntbann]

Re: arm355n

What have you done so far? If this 22-6 print out is from this machine you need an exit unit also.

[ZOOTECH]

Re: arm355n

I wouldn't put too much money in this machine with over a million on the meter.

[foudl]

Re: arm355n

Yes the 22-6 is from this machine. It is scan from the cis (duplex), no prob with the printer it seems to come from the cis, What do you mean when you say that i need an exit unit also .

Thanks.

[ZOOTECH]

Re: arm355n

Yes the 22-6 is from this machine. It is scan from the cis (duplex), no prob with the printer it seems to come from the cis, What do you mean when you say that i need an exit unit also .

Thanks.

I think they were referring to the jam codes.

[foudl]

Re: arm355n

Yes i know that it is old ,but i just want to know if someone saw it on one of his machine ,does anyone ever changed a cis on these machines ,the jam map does represent the jams over a 3 months basis ,so it's not a real issue here.

[ZOOTECH]

Re: arm355n

Yes i know that it is old ,but i just want to know if someone saw it on one of his machine ,does anyone ever changed a cis on these machines ,the jam map does represent the jams over a 3 months basis ,so it's not a real issue here.

Yes, we have had to replace the CIS on this family and the Dragon series.

[lky1978]

Re: arm355n

[ATTACH]26635[/ATTACH]

I have bad cq when using duplex, the lines on b side seems thicker, which adjustment should i use to get the image clear, the cis is clean.

i have done more 10 units in field, just replace the left feeder hinge MHNG-0209FCZ1 .
The feeder hinge bent and cause the CIS unit not touch completely with the White datum glass unit CGLSP0102DS51

[Akitu]

Re: arm355n

Million copies on the unit? If the main drive pack hasn't already been replaced you should do it as a precautionary measure. Once the drive pack hits those numbers it starts to slip and you get lots of extra jamming out of tray 1.

[foudl]

Re: arm355n

Million copies on the unit? If the main drive pack hasn't already been replaced you should do it as a precautionary measure. Once the drive pack hits those numbers it starts to slip and you get lots of extra jamming out of tray 1.

Yes it was done at 700k,so i should be good for a while