Sharp MX-FR14U

[lenovos]

Hi I just purchased an off lease Sharp MX-363N with a data security kit. I tried to update firm ware an I get a firmware does not match message. I checked firmware twice.

Also checked dip switches on MFP power board. juniper 0303jci0

Thanks in advance

[ZOOTECH]

Re: Sharp MX-FR14U

Hi I just purchased an off lease Sharp MX-363N with a data security kit. I tried to update firm ware an I get a firmware does not match message. I checked firmware twice.

Also checked dip switches on MFP power board. juniper 0303jci0

Thanks in advance

You need to download the DSK firmware, not the machine's firmware.

Jupiter3_DSK_Conbi_0303jci0_B.sfu

[lenovos]

Re: Sharp MX-FR14U

You need to download the DSK firmware, not the machine's firmware.

Jupiter3_DSK_Conbi_0303jci0_B.sfu

That is what I did.

[lenovos]

Re: Sharp MX-FR14U

That is what I tried, but the machine does not like it. Are their any soft switches that would block it?

[ZOOTECH]

Re: Sharp MX-FR14U

That is what I tried, but the machine does not like it. Are their any soft switches that would block it?

Not that I'm aware of; what method are you using for the upgrade?

[lenovos]

Re: Sharp MX-FR14U

49-1 with a flash drive. I tried both USB ports. the description of the security kit says common crit, does that mean any thing?

[lenovos]

Re: Sharp MX-FR14U

MX-FR14.pdf Here is description of it

[tmaged]

Re: Sharp MX-FR14U

You have an MX-FR14 not an MX-FR14U. Common Criteria DSK's are certified & cannot be updated. If you change it, it's no longer certified.

[lenovos]

Re: Sharp MX-FR14U

Thank you, I did not know that their was another version. I wish that their was a way to delete those programs. I appreciate all of your responses.


Thanks

[Akitu]

Re: Sharp MX-FR14U

If you can get a regular PRG and Boot ROM set, your data security kit will be gone.

[Paulm]

Re: Sharp MX-FR14U

Make sure you don't have the MX-fr23u. Let just say from a certain past experience it shows up as a 14u in the 22-10. See TT TT-20215.

[lenovos]

Re: Sharp MX-FR14U

Are you sure that it is just those two chips? I have removed it from some older machines but I figured that their was more to it on newer equipment.

I wonder if I could use MX- 2600 chips flashing them manually? I have a parts machine.

Thanks to all again

[Paulm]

Re: Sharp MX-FR14U

If you can get a regular PRG and Boot ROM set, your data security kit will be gone.

It will show error code if you install original ROMs. I had to reset Passwords this way on three units and it does show error.

[lenovos]

Re: Sharp MX-FR14U

Make sure you don't have the MX-fr23u. Let just say from a certain past experience it shows up as a 14u in the 22-10. See TT TT-20215.

Nope their is no U

[lenovos]

Re: Sharp MX-FR14U

It will show error code if you install original ROMs. I had to reset Passwords this way on three units and it does show error.

if you reflashed the machine would the error go away?