Error code C4-00

[bilyahn]

Re: Error code C4-00

Replace the PTC unit

Replace the primary transfer unit.

Replace the secondary transfer unit.Check disconnection of the high voltage TC PWBconnector./Replace.Replace the high voltage TC PWB.

Replace the PCU PWB.

Those are the troubleshooting steps. I'd check your primary transfer belt first to see if there is something damaged since if it was the PTC you would get the code everytime.

Good luck.

Bil

[Peter Sim]

Hi to all,
Need help.
Mx-1810 when printing color will show error code C4-00,Black and white ok.
Machine only run color for few hundred copies and is new set up machine.
Any help or suggestion will much appreciate.
Thank you in advance.