AR M455 Creasing paper

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mlbcopiers
    Technician
    • Oct 2007
    • 34
    #1

    AR M455 Creasing paper

    I have a Sharp AR M455 with a lot of copies on it. It has just started to crease the paper. It appears to be happening in or before the fusing unit. I have replaced the upper and lower fuser rollers and have replaced the paper feed rollers. I am still getting intermittent creases in the paper.

    What am I missing?
    Thanks for the help.
    Tags: None
    • harleyrider
      Trusted Tech

      250+ Posts
      • Oct 2011
      • 348
      #2
      Re: AR M455 Creasing paper

      PS roller unit maybe or exit unit or shit paper. Seen all 3 cause it.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22996
          #3
          Re: AR M455 Creasing paper

          Originally posted by harleyrider
          PS roller unit maybe or exit unit or shit paper. Seen all 3 cause it.
          Ditto that. Check for seizing registration roller bushings, and check to see if the paper dust collector is packed full. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • lcastillo5
              Technician
              • Jun 2008
              • 32
              #4
              Re: AR M455 Creasing paper

              Did you replace the 4 fuser bearings when you replaced the fuser rollers?

                Comment

                Previous template Next
                Working...