AR M450 laser polygon motor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • swagreis
    Technician
    • Jun 2008
    • 92

    #1

    AR M450 laser polygon motor

    i need the part number of LASER MOTOR onlyof this model urgently because i faced it many times and the cost of whole laser unit is high
    anyone can help
  • NCArt
    Mountain Tech

    50+ Posts
    • May 2008
    • 81

    #2
    DUNT-7093DSZZ for AR-M350, DUNT-7093DS11 for AR-M450

    Comment

    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008

      #3
      NCart: He wants the separate polygon mirror motor only.

      Swagreis: I think this is what you're looking for: RMOTP0910FCPZ
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

      Comment

      • swagreis
        Technician
        • Jun 2008
        • 92

        #4
        I mean the motor which inside laser unit
        so please confirm is that the right part number because i will make an order of that motor.
        thanks

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008

          #5
          Swagreis: I think this is what you're looking for: RMOTP0910FCPZ

          This is the polygon mirror motor. It's the only motor in the laser unit. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          • NCArt
            Mountain Tech

            50+ Posts
            • May 2008
            • 81

            #6
            Originally posted by blackcat4866
            NCart: He wants the separate polygon mirror motor only.

            Swagreis: I think this is what you're looking for: RMOTP0910FCPZ
            Yep, you are correct. My bad!!

            Comment

            Working...