Toshiba 161

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Orion2010
    Trusted Tech
    • Jun 2015
    • 176
    #1

    Toshiba 161

    Hello to all,
    i have problem with toshiba 161 I change drum and blade, but after a little time when I make copier in the paper appears shadows like in the picture
    Attached Files
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: Toshiba 161

      It could be primary charge, or developing, maybe both. Personally I would order a sawtooth, grid, and developer. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • didi2005
          Trusted Tech

          250+ Posts
          • May 2011
          • 401
          #3
          Re: Toshiba 161

          Open cover/doc feeder, perform copy and see the outcome, if no solid black or many white patches, probably the developer material not enough~~~

            Comment

            • riyadh hossainbd
              Trusted Tech
              • Dec 2015
              • 239
              #4
              Re: Toshiba 161

              I think your drum is not good, try another one

                Comment

                • Harry
                  Trusted Tech

                  100+ Posts
                  • Feb 2009
                  • 228
                  #5
                  Re: Toshiba 161

                  This is a sharp and if you change Drum and Cleaning Blade change also Developer the Developer dont have a good duration about 60K Get also a lock at the Developer Case Somethimes it gets out of Positione and lost Developer.
                  Good Luck

                    Comment

                    Previous template Next
                    Working...