all of the sudden we have a rash of these webs sticking to the ufr and some times even the lfr. we use only tosh oem fuser parts. after sticking to the fuser roller it usually breaks and wraps around. we went for ages with no real web problems, has anyone seen this? thanks--jim
tosh 655-557 fuser web problems
Collapse
X
-
Re: tosh 655-557 fuser web problems
Is the web advancing properly? If not, the upper roller will wear right through the web, and the upper roller will get a heavy buildup of toner. And you'll get duplex jams.
This is what I discovered:
eS857 no web advance.jpg
At the last fuser rebuild, a pin backed out of the connector. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment