If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Good morning
I need firmware toshiba studio 2820c
And also I am not able to configure the scanning to email (gmail or outlook) it gives me this error
Invalid address specified in From: field
either
Failed to connect to SMTP server
Thank you
I am currently looking for the firmware for the Toshiba E-Studio 2555cse (Europe).
Annoyingly, the hard drive died and I received error codes F105 and then F101. So I have to format the hard drive and rewrite the firmware and initialise it.
I already have another suitable hard drive of an equivalent e-studio model.
The currently installed system firmware version is 2191C (1.0.3.0)
Maybe someone can help me and provide the firmware to get the machine working again. Thanks
Have a nice day!
OT:
My post and user account didn't survive the transition to the new forum, but most likely I was just unlucky.
Looks great.
Please i am working with copier and i need firmware for different models please can you reply on my email , infosystemsvl@yahoo.com.
Please i really need them
Can anyone please help in where i can purchase a HDD for the E-studio Toshiba 5015 with the firmware already installed or where i can obtain the firmware either as a download or purchase a dongle with the firmware on it ready to install onto the 5015 - machine in UK / Europe?
Can anyone please help in where i can purchase a HDD for the E-studio Toshiba 5015 with the firmware already installed or where i can obtain the firmware either as a download or purchase a dongle with the firmware on it ready to install onto the 5015 - machine in UK / Europe?
A HDD cannot be purchased anywhere with the firmware pre-installed. Each machine has it's own encryption key used when loading firmware. A good working HDD of the same type on another machine will not work on a second machine with a different encryption key until firmware is loaded through the recipient machine.
I hope that was clear.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Comment