[Error Code] E257 F106 error, now it keeps rebooting

[Guest]

Customer called with an F106 error. When I got there I could not get into any service modes, 3C, 4C, 08, even tried updating firmware, 49.

About a minute or so into the Toshiba ribbon screen it just shuts down and reboots.....

There was a power outage a couple days prior but the customer has been using it for a day since.

I don't see any bad capacitors or fuses.... at a loss here....

[Mr Spock]

Re: E257 F106 error, now it keeps rebooting

Usually the f100's are hdd related but based on what you are describing it could be a bad board, memory module or nvram issue..

I do not have the book in front of me to look the code up.

[didi2005]

Re: E257 F106 error, now it keeps rebooting

I did encountered similar issue where MFP keep rebooting, not able to enter 08 or 49 mode...due to HDD faulty...

[tech07]

Re: E257 F106 error, now it keeps rebooting

Your only solution is a new HDD

[blackcat4866]

Re: E257 F106 error, now it keeps rebooting

Your only solution is a new HDD

Wipe Drive + Firmware. You'll want to follow the procedure in the service manual. =^..^=