[CQ] ES-755 DEVELOPER UNIT

[ONAGA]

Is there any way to put a used developer unit with used developer into a machine and reset it up? Thank you for any help!!

[Hansen88]

Re: ES-755 DEVELOPER UNIT

It is not the best thing to do, but I have done it before in the past. If the quality looks good on it then run the 05-200 to lock it in where it is at. If it is too light I will manually add a little toner and get the quality where I want it and then run the 200 code. Like I said, it is not the best thing to do but I have got out of a jam by doing it before and it lasted a good time with no troubles.

[ONAGA]

Re: ES-755 DEVELOPER UNIT

It is not the best thing to do, but I have done it before in the past. If the quality looks good on it then run the 05-200 to lock it in where it is at. If it is too light I will manually add a little toner and get the quality where I want it and then run the 200 code. Like I said, it is not the best thing to do but I have got out of a jam by doing it before and it lasted a good time with no troubles.

That is what i just tried and it seems to be working for now. THANK YOU for the info.

[ARMAN.MZ]

Re: ES-755 DEVELOPER UNIT

That is what i just tried and it seems to be working for now. THANK YOU for the info.

in mode 05-200
device thinks devloper is new (buy new unit ) and change bios setting.

if the developer used to another device and you put it in your mfp 755 you must use....

6+ start On device
and when device is redy
1+ start
after 3 min device stop and turn off
torn on and use device