change logo

[SalesServiceGuy]

Re: change logo

On the current eBridge Next products like the e4508A, you first need to create a .png image file measuring exactly 480 pixels tall x 800 pixels wide and install the same on a USB drive.

Insert the USB drive into the copier and press the Gear icon located at the top of the LCD panel.

Enter 123456 and scroll down to Edit back ground image. Upload your file into the copier and apply.

As a value added service to your customer you can create a free png file from 301 Moved Permanently

and follow the detailed instructions from this Youtube video.

[ARMAN.MZ]

Re: change logo

The banner advertising is on the screen most of the time along the a top of the screen, it is 2 lines of text. That alternate
There is no way to change the software boot up logo, unless you custom write the firmware.

Sent from my Nexus 5 using Tapatalk

yes i know

but in 4508 you can insert your image to logo
but i dont know how?

[clint@clintsimonsen.com]

Re: change logo

The banner advertising is on the screen most of the time along the a top of the screen, it is 2 lines of text. That alternate
There is no way to change the software boot up logo, unless you custom write the firmware.

Sent from my Nexus 5 using Tapatalk

[ARMAN.MZ]

Re: change logo

You did not specify the model. On current models code 08(9327) "Setting of banner advertising display".
Codes 08(9328) allows changing of banner 1 (27 characters max) 08(9329) allows changing of banner 2

thanks

which model's can be change ?

can upload photo?
to when mfp turn on we see photo

[gliderider]

Re: change logo

You did not specify the model. On current models code 08(9327) "Setting of banner advertising display".
Codes 08(9328) allows changing of banner 1 (27 characters max) 08(9329) allows changing of banner 2

[ARMAN.MZ]

Hi
Any body know how to change advertisement logo in toshiba ?