Tosihba 6505ac Develope runit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aligis
    Technician
    • Jul 2010
    • 56
    #1

    Tosihba 6505ac Develope runit

    hi everyone,
    we have 3 machines toshiba estudio 6505Ac , every now and then developer acumulates at the rear part of the developer unit and push the 3 rear gears,machine give error c022 we have to change these gears like choclates . all of them have above 2k prints. any clue.

    Thanksdev1r.jpgdev2r.jpg
    Tags: 6505ac, developer, gears, rear, toshiba 6505ac
    • Blizzoo
      Senior Tech

      Site Contributor
      500+ Posts
      • Aug 2013
      • 607
      #2
      Re: Tosihba 6505ac Develope runit

      Take a look at the spring scraper for the self replenish developer system inside the affected developer unit, this has been changed back to the one used in 6570C series 6LH02928000 to prevent what you experience.
      Defects are simple, our mind is complicated

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22997
          #3
          Re: Tosihba 6505ac Develope runit

          Could you mean eS6506ACT? I've repaired a number of these developing units before the first PM. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • aligis
              Technician
              • Jul 2010
              • 56
              #4
              Re: Tosihba 6505ac Develope runit

              Thanks dear ... , that is already replaced

                Comment

                • aligis
                  Technician
                  • Jul 2010
                  • 56
                  #5
                  Re: Tosihba 6505ac Develope runit

                  I think estudio 6506AC is new series and we have 6505 Ac/5505AC. Any tip for resolving problem. Thanks

                    Comment

                    • Blizzoo
                      Senior Tech

                      Site Contributor
                      500+ Posts
                      • Aug 2013
                      • 607
                      #6
                      Re: Tosihba 6505ac Develope runit

                      Is the machine leveled? Was the developer material replaced along with the spring?
                      Defects are simple, our mind is complicated

                        Comment

                        Previous template Next
                        Working...