Toshiba Studio 452 hang up

[gregoriojc]

Hello guys Im facing a problem on toshiba sudio 452
hang up, when i put on the machine the lcd displays shows and theres no any btton or light indicators are on, heres the snap shop of the lcd panel ..
at the attachment pls. help


joseph

[tsbservice]

Try 08/690 press 2 then set. Next thing is new HDD and new firmware.

[gregoriojc]

Can not enter to program mode, i have the hdd but i dont have firmware,
pls could you help me to get firmware for this machine and the procedure to download the firmware.

thanks
joseph

[aalex_bom]

firmware update

i have e350 and problem same.
can you send for me??
my e mail ": nhatthuc0000@gmail.com
i posted SH 350 - mode 08
thanks

[gregoriojc]

thanks a lot
i will try these procedures and about the firmware still not get.
when i have ill share it to you.

gregoriojc

[jawir]

Hi,

I have similiar case like this before and after I change with new NVRAM it work fine. I did not try update the firmware.


regards

[Naveed Shahid]

Dear brother i am also faced problem same like ur i upgrade firm ware version and solve the problem

Hello guys Im facing a problem on toshiba sudio 452
hang up, when i put on the machine the lcd displays shows and theres no any btton or light indicators are on, heres the snap shop of the lcd panel ..
at the attachment pls. help


joseph

[aalex_bom]

Dear brother i am also faced problem same like ur i upgrade firm ware version and solve the problem

if HDD gone down, you must attach new HDD and load FW

[gregoriojc]

I got new hdd but no fw loaded, I took another machine hdd and clone it using norton ghost, it works well

thaks guys

[crazy]

if it isn t hdd problem look at ram on sys board or change sys board

[michaelc]

It could need a HD format, and firmware.