Toshiba Studio 452 hang up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gregoriojc
    Technician

    50+ Posts
    • Aug 2008
    • 56

    #1

    Toshiba Studio 452 hang up

    Hello guys Im facing a problem on toshiba sudio 452
    hang up, when i put on the machine the lcd displays shows and theres no any btton or light indicators are on, heres the snap shop of the lcd panel ..
    at the attachment pls. help


    joseph
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7963

    #2
    Try 08/690 press 2 then set. Next thing is new HDD and new firmware.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • gregoriojc
      Technician

      50+ Posts
      • Aug 2008
      • 56

      #3
      Can not enter to program mode, i have the hdd but i dont have firmware,
      pls could you help me to get firmware for this machine and the procedure to download the firmware.

      thanks
      joseph

      Comment

      • aalex_bom
        Trusted Tech
        • Jan 2008
        • 214

        #4
        firmware update

        i have e350 and problem same.
        can you send for me??
        my e mail ": nhatthuc0000@gmail.com
        i posted SH 350 - mode 08
        thanks
        Last edited by aalex_bom; 12-20-2008, 05:53 AM.

        Comment

        • gregoriojc
          Technician

          50+ Posts
          • Aug 2008
          • 56

          #5
          thanks a lot
          i will try these procedures and about the firmware still not get.
          when i have ill share it to you.

          gregoriojc

          Comment

          • jawir
            Trusted Tech

            100+ Posts
            • Aug 2007
            • 107

            #6
            Hi,

            I have similiar case like this before and after I change with new NVRAM it work fine. I did not try update the firmware.


            regards

            Comment

            • Naveed Shahid
              Trusted Tech
              Site Contributor
              100+ Posts
              • May 2008
              • 162

              #7
              Dear brother i am also faced problem same like ur i upgrade firm ware version and solve the problem

              Originally posted by gregoriojc
              Hello guys Im facing a problem on toshiba sudio 452
              hang up, when i put on the machine the lcd displays shows and theres no any btton or light indicators are on, heres the snap shop of the lcd panel ..
              at the attachment pls. help


              joseph

              Comment

              • aalex_bom
                Trusted Tech
                • Jan 2008
                • 214

                #8
                Originally posted by Naveed Shahid
                Dear brother i am also faced problem same like ur i upgrade firm ware version and solve the problem
                if HDD gone down, you must attach new HDD and load FW

                Comment

                • gregoriojc
                  Technician

                  50+ Posts
                  • Aug 2008
                  • 56

                  #9
                  I got new hdd but no fw loaded, I took another machine hdd and clone it using norton ghost, it works well

                  thaks guys

                  Comment

                  • crazy
                    Technician
                    • May 2011
                    • 15

                    #10
                    if it isn t hdd problem look at ram on sys board or change sys board

                    Comment

                    • michaelc
                      Field Tech

                      Site Contributor
                      500+ Posts
                      • Mar 2011
                      • 590

                      #11
                      It could need a HD format, and firmware.
                      It didn't say that I couldn't do it in the manual.

                      Comment

                      Working...