Toshiba 4515AC E712

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23010
    #16
    Re: Toshiba 4515AC E712

    Originally posted by buzz
    Results: bad RADF PCB. Replaced and all is well. Thanks everyone!
    Congratulations. That's a fairly unusual issue. Thanks for sharing. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • buzz
        Trusted Tech

        Site Contributor
        250+ Posts
        • Aug 2013
        • 288
        #17
        Re: Toshiba 4515AC E712

        Originally posted by blackcat4866
        Congratulations. That's a fairly unusual issue. Thanks for sharing. =^..^=
        Yes it was. More unusual is that we also received a replacement RADF PCB from Hytec, plugged it in, and the Pick Up solenoid was not engaging to drop down the Take Up Roller and so we had to send that PCB back as well.

        The second PCB worked like a charm.

          Comment

          Previous 1 2 template Next
          Working...