Estudio 207 Machine reset now not working

[prabh81]

Dear Experts
i have a E-studio 207 machine , and while dusting the machine i , my mistake remove the battery part of the machine. now the display of the machine is blinking and machine is not working at all . and now i am stuck what to do..


Please help me out of this
P.D

[ivovb]

Why not try 1+3+* and power on. I mean press buttons 1, 3 and * and power on the machine.

BR

[prabh81]

Thanks i will try

Thank you dear , i will try and give you the response

P.D

[prabh81]

Dear
now the machine , after your 1+3+* is asking for f14 , call the service "what this code means F14 and how we remove this"

[ivovb]

This code means that there is difference between main and back up countrer. It is a common problem after electric shock/lightening. Do 08-388 and it will be ok (switch off the machine, press 0 and 8 and switch on the machine, set code 388 and press set key).

BR

[prabh81]

now asking CA2

dear
now the machine is givng CA2 code

[ivovb]

Are you kidding me? This machine looks like is produced on a 13th Friday.

CA2 means a problem with a laser unit. Disconnect all of the cables to laser unit, main pcb and power/high voltage pcb and reconnect them firmly. General procedure concerning this code is as follows:

[CA2] H-Sync detection error
Are the harness open circuited and the connectors disconnected or misconnected between the MAIN board (CN21, CN22) and laser optical unit?
YES
1) Connect the disconnected connectors.
2) Replace the laser optical unit if the harness is open circuited.
NO
1) Replace the MAIN board.
2) Replace the laser optical unit.

BR

[decimal]

I think your machine need a new NVRAM

[prabh81]

Thankyou dear

the machine is in working condition now, CA2 is also solved , the out paper sensor is jammed thats why the machine is giving CA2 , but in all machine is working

thanks

P.D

[ivovb]

Thankyou dear

the machine is in working condition now, CA2 is also solved , the out paper sensor is jammed thats why the machine is giving CA2 , but in all machine is working

thanks

P.D

You are welcome. And thanks for feed back.

BR

PS If you are really happy for my help - add some reputation to my account.