Failure, new belt holder, 8508

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rusty.Harris
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2021
    • 587

    #1

    Failure, new belt holder, 8508

    Tech said this one lasted about 10 minutes. When I checked it, the center thermistor was open/closed depending on if you
    touch it.

    Close up of the center thermistor.

    Capture.JPG
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22863

    #2
    Re: Failure, new belt holder, 8508

    Disappointing. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    Working...