not save settings Toshiba e-studio 4520c

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • grafix
    Technician
    • Mar 2010
    • 18
    #1

    not save settings Toshiba e-studio 4520c

    not save settings Toshiba e-studio 4520c
    Will not save settings in the admin menu ... after the restart MFU reset to default settings (((How to solve the problem?
    Tags: 2138, 452, 4520, 4520c, 520, admin, color settings, default, e-studio, e-studio 4520c, gamma, interrupt, network, ops, print controller, printing, reset, restart, save, set, settings, solution, solve, studio, studio 45, tech, top access, toshiba, toshiba e-studio, toshiba e-studio 4520c, white dots, work
    • sdrawkcab
      Confused & Bewildered

      250+ Posts
      • Jun 2009
      • 317
      #2
      What settings are you refering too? if it's the Network settings, are you pressing 'Apply Now' when finished.
      Some days, it's just not worth chewing through the restraints

        Comment

        • grafix
          Technician
          • Mar 2010
          • 18
          #3
          Scanner&copy will not save settings. ะnd choice of language menu ...
          Is reset to default settings after a reboot...( 200dpi and color settings default)
          Colors is not natural ... When printing color dark. (White paper 80g/m), small white dots on the printed image.
          Last edited by grafix; 03-27-2010, 04:33 AM.

            Comment

            • grafix
              Technician
              • Mar 2010
              • 18
              #4
              Eurica!!! Found a solution so simple...

                Comment

                • tinnyjay
                  Senior Tech

                  500+ Posts
                  • Oct 2009
                  • 662
                  #5
                  Does it has installed a Network Based Print Controller?

                  If yes,go to Top Access and change General Copy Settings(Scan setting,resolution,Energy Saver and other things...)

                  If you want to change language go to Menu and and see if English is installed.If it is,turn the copier off and enter service mode turning on by pressing 0+8 and 220-0-Interrupt or Enter and wait for "reboot the machine".
                  If you have problem with printing density,sharpness,gamma i sugest you to do nothing by yourself,but find a good techician and let the "stress" to him.
                  "Who loves the roses,must also bear thumbs"

                    Comment

                    • TheOwl
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Nov 2008
                      • 1732
                      #6
                      What was the solution?

                      Originally posted by grafix
                      Eurica!!! Found a solution so simple...
                      Please don't ask me for firmware or service manuals as refusal often offends.

                        Comment

                        • grafix
                          Technician
                          • Mar 2010
                          • 18
                          #7
                          Originally posted by TheOwl
                          What was the solution?
                          Reply to e2820c_3520c_4520c_MFP_Management_Guide_Ver04.pdf, e2820c_3520c_4520c_Printing_Guide_Ver02.pdf, e2820c_3520c_4520c_Scanning_Guide_Ver03.pdf, e2820c_3520c_4520c_Imaging_Manual_Ver01.pdf... tech doc

                            Comment

                            • grafix
                              Technician
                              • Mar 2010
                              • 18
                              #8
                              Toshiba UserManuals hxxp://www.gioffice.com/Op_manuals.htm


                                Comment

                                Previous template Next
                                Working...