c26 in toshiba e-studio200
Collapse
X
-
If the lamp is coming on then you most likely have a bad CCD or maybe a bad SLG. In that order. The error codes is a peak adjustment error meaning that when the machine illuminated the white reference plate the CCD or SLG didn't see what it thought it should. I have had to replace many more CCDs on Toshibas than I have SLG boards. -
c26 basically means the scan lamp is not coming on
is the lamp lighting on power on. check clean white ref plate on underside of exposure glassLeave a comment:
-
c26 in toshiba e-studio200
can any body help me to solve c26 in toshiba e-studio200.bundle of thanks
Leave a comment: