121 results in 0.0297 seconds.
-
Sharp MX-B402 Glass Fogging
Hey Sharp guys, has anyone had the underside of the scan glass get fogged ( on a MX-B402)? I just a week ago disassembled (to get to) and cleaned the... -
Biz C3350
First time I sold one of these small units and customer called and said there is spot of dirt on underside of glass. Didn't see anything in serv manual... -
GR3770 marking underside of prints
Hi,
My gr3770 (probably the most problematic riso every made judging by the frequency of my posting on this forum) is marking the underside... -
samsung scx 4216 two black line
hello samsung scx 4216 make two black line(like drum's line when it became bad) ,when i make copie from the feeder,but when i put the original copie on... -
admin password and fuser resetting olivetti mf25
Hi all I was wondering if anyone could tell me the admin pasword on olivetti mf25 i used it about 4 years ago but cant remember it now (or find it). I... -
MP7500 overtoning
Hello folks.
I've got an MP7500 which wasn't serviced by us before and it appears to have had its counters reset (really, don't look at me!)... -
GR3770 No Power
Just got a 3770 with an editing board and it won't power up at all. Any ideas? It was working before I picked it up, but we had a long cold drive home... -
Canon Pixma MP620 multi, problem gears of printhead wiping mechanism
Can anyone provide, or know where I can get a diagram or see a close-up image of the mechanism which wipes the underside of the printhead when it's in... -
c6500 color issues
Hi
I have a c6500 with uneven yellow front to back across the page. Darker at the front and lighter at the rear.
Anyone have... -
Irc 3220 copy problem with the copy
I have a problem with the copy on IRC 3220 what could have been?Drums about 80%,fixing asembly looks good,ITB looks good,transfer cleaning unit new.Next...Last edited by doktor; 01-22-2011, 12:53 AM. -
C6500 Fuser issues
I have a Pro C6500 which has the "FIXING DRIVE GEAR /F 20T 28T" A03U808600 lossing its teeth once per fortnight. The fuser has been fully serviced... -
big problem of Konica Minolta C6500
the test pattern is 53,density setting is 80.the copy is showed as below
see the outside,it is different with other area.it is hard to express，the... -
irc 5151 copy quality
Hi folks.I have a irc 5151 that is dragging/smearing the image on the operator side of the machine aprox.1/4 inch in.I removed the right hand panel and... -
Bizhub C250 Transfer Unit Fuse Location?
Okay, I have replaced many a fuse on the C350/351 series, this is the first C250 we have run across needing it. Where is the fuse located? I removed... -
Estudio 2500c White Line
Hey guys I am having a very narrow, feint white line appear on my prints and copies. Its not solid, goes from edge to edge, and appears most noticeably...
