[Misc] Toshiba Estudio 351C Print Quality

[jcontractor]

Hi,

Any recommendation to get more quality in color mode?
Black copies are good.

The machine have 87,000 copies.

Scanner Glass and mirrors was cleaned.
Second transfer roller was changed for a new one.
Not jet verified the first transfer roller.
It is recommended to run auto developer calibration in (05) mode code 200?
And is it recommended, witch are suppose to be the results values?

Thanks in advance for any help.

[Gregg]

You wont get great on this machine, Its a workgroup B&W Copier with color capabilities. The 2500 3500c are much better.

[emujo]

pull the x-fer belt and scotch brite all rollers, then remove and clean the laser unit. You may need to crack it open to get any dust inside. Poly mirror can get dirty as well. Look at the spacers on the drum unit and ensure these are postioned correctly. Clean the IQC sensors ( but don't touch the felt like reflective material, just blow the dust out).Re-install all and do your 05/395 and CQ adjustments (either 05 mode or through the op panel works fine). Should have major improvements after these few items. ( I am assuming all your consumables ie drum, developer are not past their life spans). Emujo

[jcontractor]

Thanks for your response, this give me an idea what I should spec of the Color capability of this machine.
By the way, there is a new toner in the market with more color capability to get more sharp images.
I will try to get the information and give to you to get your opinion about this new toner.

[jcontractor]

I will work today in this machine, I will let you know the results. Thanks a lot for all your help.

[jcontractor]

Toshiba Color Copier

You wont get great on this machine, Its a workgroup B&W Copier with color capabilities. The 2500 3500c are much better.

The 3511 area better in color?

[sdrawkcab]

The 3511 area better in color?

Noooooooooooooooo anything but a 3511.

If your looking for great colour go for the Masherbrum range 2820c~4520c

[jcontractor]

Noooooooooooooooo anything but a 3511.

If your looking for great colour go for the Masherbrum range 2820c~4520c

Great, I will check those machines. Thanks for your expert advice. It is very appreciate.

[Doctor]

Noooooooooooooooo anything but a 3511.

If your looking for great colour go for the Masherbrum range 2820c~4520c

Is 2330c in this Masherbrum range?

[ToshibaTech]

2330c is in that series.

I think there is a 2330, 2830, 3530, 4520

There might be one more in there i'm forgetting. they are all the same machine, just different page per minute.