3560 Drum Jitter

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Boogotshot
    Technician

    50+ Posts
    • Jul 2007
    • 61
    #1

    3560 Drum Jitter

    Did the PM on the machine. Now has a bad drum jitter and vibration. Did not have it before the PM. Removed the drum unit, and ran in 03 mode. No noise. Ran with Developer unit in 03 mode, no noise. Put the process unit back together and ran in 03 mode and it jitters like crazy.
    I'm pulling my hair out on this one guys. Maybe something I missed. I haven't seen one of these in years.
    sigpic No! we never do that with the copier.
    Tags: 3560, damaging, dev, developer unit, drum, jitter, jittering, spacers
    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064
      #2
      Originally posted by Boogotshot
      Did the PM on the machine. Now has a bad drum jitter and vibration. Did not have it before the PM. Removed the drum unit, and ran in 03 mode. No noise. Ran with Developer unit in 03 mode, no noise. Put the process unit back together and ran in 03 mode and it jitters like crazy.
      I'm pulling my hair out on this one guys. Maybe something I missed. I haven't seen one of these in years.
      Check the drum blade if drum is not dusted it can cause the blade to flip.
      And Star Trek was just a tv show...yeah right!

        Comment

        • Boogotshot
          Technician

          50+ Posts
          • Jul 2007
          • 61
          #3
          Already replaced the drum and drum blade. Still getting the jitter. I am going to replace the developer spacing guide rollers next. I think the spacing isn't correct and may be causing the jittering. Weird problem though.
          sigpic No! we never do that with the copier.

            Comment

            • tsbservice
              Field tech

              Site Contributor
              5,000+ Posts
              • May 2007
              • 7963
              #4
              Dev spacers(mag roller roll guides) will do that more than likely.3 or so drum without replacing them?Check side dev seals for cuts and if any replace them.
              These will allow developer run via and damaging roll guides.

              Good luck
              A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
              Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                Comment

                • wagon
                  Village Idiot

                  500+ Posts
                  • Dec 2006
                  • 654
                  #5
                  I agree... drum spacer rollers play up 'lots' on 2060/2860/3560/4560.. check if they wobble from side to side a lot-sometimes you can do a temporary fix by packing them on both sides with flat washers.
                  If you are hitting your head up against a wall it always feels better when you stop.

                    Comment

                    Previous template Next
                    Working...