toshiba e-studio 452 error c480

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • smiley
    Senior Tech

    500+ Posts
    • Aug 2008
    • 616
    #1

    toshiba e-studio 452 error c480

    good day guys i just change the upper fuser roller after i replaced it. it give this code i try to reset this code but nothing happens. guys pleased help me on this. pleased...
    there is no glory without sacrifice
    Tags: change, code, error, fuser, good, reset, roller, studio, toshiba, upper
    • CCS
      Trusted Tech

      Site Contributor
      250+ Posts
      • Feb 2008
      • 266
      #2
      Re: toshiba e-studio 452 error c480

      (C480) IGBT high temperature
      Check connection on IH board cooling fan

      Clear the status counter: Change the values "12" , "15" or "18" of the status counter (08-400) to "0"

        Comment

        • canonbundy
          Senior Tech

          500+ Posts
          • Jun 2012
          • 607
          #3
          Re: toshiba e-studio 452 error c480

          Originally posted by smiley
          good day guys i just change the upper fuser roller after i replaced it. it give this code i try to reset this code but nothing happens. guys pleased help me on this. pleased...
          Make sure the IH Coil is correctly positioned in the Housing both ends of the Fuser also make sure the Thermistors are clean and in proper contact with the Roller, then reset the Error - 08-400 to 0.

            Comment

            Previous template Next
            Working...