Nielbatiks: Don't end your title with the word print or you'll get a "print screen"

[Tonerbomb]

Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

I have occasionally ran into problems with Ricoh products being detected as WSD devices by Windows. If the person installing the driver uses the detected device instead a Standard TCP/IP port, it is always a problem. I have occasionally installed a print driver using the NetBIOS name of the device when I have had to go to the same customer the third time in as many months because they have changed a router and gone to a different subnet.

yeah the wsd thing ain't all that and a bag of chips, neither are the W7 and W8 packaged drivers for some manufacturers!!!!!!!!!!!!!

[Neilbatiks]

Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

yeah the wsd thing ain't all that and a bag of chips, neither are the W7 and W8 packaged drivers for some manufacturers!!!!!!!!!!!!!

Thanks for all of yours opinion in this matter,

Try to add TCP/IP but no "device detected" says windows

Here is the properties of Device
IP.jpg
IP3.jpgIP2.jpg

@
slimslob I think what your says may be the problem here !
please advice on that,
If I try to uninstall or remove the copier from printers and fax's box and try to add again the copier as a new device windows all ready adds it with default drives, then after I had update driver and have disk for correct drives but, IT wont print !!!!!!!

[Mr Spock]

Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

Is your machine networked or usb?
If networked then goto printer properties> ports and do as I suggested earlier.
If it is usb then you may be stuck with the wsd port.