Nielbatiks: Don't end your title with the word print or you'll get a "print screen"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tonerbomb
    AutoMajical Resolutionist

    Site Contributor
    2,500+ Posts
    • Feb 2005
    • 2589

    #16
    Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

    Originally posted by slimslob
    I have occasionally ran into problems with Ricoh products being detected as WSD devices by Windows. If the person installing the driver uses the detected device instead a Standard TCP/IP port, it is always a problem. I have occasionally installed a print driver using the NetBIOS name of the device when I have had to go to the same customer the third time in as many months because they have changed a router and gone to a different subnet.
    yeah the wsd thing ain't all that and a bag of chips, neither are the W7 and W8 packaged drivers for some manufacturers!!!!!!!!!!!!!
    Mystic Crystal Revelations

    Comment

    • Neilbatiks
      Junior Member
      • Jul 2014
      • 9

      #17
      Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

      Originally posted by Tonerbomb
      yeah the wsd thing ain't all that and a bag of chips, neither are the W7 and W8 packaged drivers for some manufacturers!!!!!!!!!!!!!
      Thanks for all of yours opinion in this matter,

      Try to add TCP/IP but no "device detected" says windows

      Here is the properties of Device
      IP.jpg
      IP3.jpgIP2.jpg

      @
      slimslob I think what your says may be the problem here !
      please advice on that,
      If I try to uninstall or remove the copier from printers and fax's box and try to add again the copier as a new device windows all ready adds it with default drives, then after I had update driver and have disk for correct drives but, IT wont print !!!!!!!
      Last edited by Neilbatiks; 08-04-2014, 09:10 AM.

      Comment

      • Mr Spock
        Vulcan Inventor of Death

        1,000+ Posts
        • Aug 2006
        • 2064

        #18
        Re: Nielbatiks: Don't end your title with the word print or you'll get a "print scree

        Is your machine networked or usb?
        If networked then goto printer properties> ports and do as I suggested earlier.
        If it is usb then you may be stuck with the wsd port.
        And Star Trek was just a tv show...yeah right!

        Comment

        Working...