e-studio 256SE ADI HDD to normal HDD

[Thomas007]

Re: e-studio 256SE ADI HDD to normal HDD

Could someone send a copy of sramu of the copier without ADI hdd?

[blackcat4866]

Re: e-studio 256SE ADI HDD to normal HDD

According to the manual, a new machine may come delivered with either a SATA drive or a ADI drive. If the machine came with a SATA drive you may install either type. If the machine has an ADI drive you must install an ADI replacement. =^..^=

[didi2005]

Re: e-studio 256SE ADI HDD to normal HDD

Previously there is something able to do that by "wiping" SRAM...

[Thomas007]

Hi everyone,

Is their any other possible procedure that's not listed in the bulletins/service manual for putting a normal type SATA HDD drive in this machine? The correct procedure could not be followed as the last owner took the ADI HDD with them.

Is the only option to get a new ADI HDD??? Surely their must be some work around for this..

Thanks in advance

SRAM clear - noting change...

Thomas007