I get fault code 124-374 when I power up the Versant 80. The pws refers to a business ready finisher, and I have the advanced production finisher with the booklet maker (TKX). I powered it off and on, unplugged and plugged the power to the finisher. No luck. Like previous models, will it run without an interface and finisher? Any advice will be appreciated.
Versant 80 124-374
Collapse
X
-
Re: Versant 80 124-374
I get fault code 124-374 when I power up the Versant 80. The pws refers to a business ready finisher, and I have the advanced production finisher with the booklet maker (TKX). I powered it off and on, unplugged and plugged the power to the finisher. No luck. Like previous models, will it run without an interface and finisher? Any advice will be appreciated.
What printer software level?Comment
-
Re: Versant 80 124-374
I don't think I have the bulletins but will do a search for that number. I have all the RAPS and Searchlite. I will let you know what level s/w Monday.
Actually, it was working fine. I used parts from this V80 to test on another one. I reinstalled the MCU, both AC power modules and both LVPS. There were lots of plugs and screws. I took my time, took lots of pictures, didn't have any extra ones but perhaps one is not seated all the way. There's a good chance that's what I will find.Comment
Comment