dcc320 imari error code 004-346

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copytech200X
    Trusted Tech

    250+ Posts
    • Apr 2009
    • 264

    #1

    dcc320 imari error code 004-346

    IBT belt too long error code...i had replaced a whole ibt assy but code still persists and belt will tear after machine starts ...any solution?
  • tech_c3
    Technician
    • Jul 2008
    • 31

    #2
    either one of the developer not seated properly that will disrupt the rotation of ibt belt. or the ibt cleaner is clogged.

    Comment

    • ck1
      Trusted Tech

      250+ Posts
      • Apr 2008
      • 485

      #3
      IBT Belt home fail too long. Try clean the sensor of IBT

      Comment

      • copytech200X
        Trusted Tech

        250+ Posts
        • Apr 2009
        • 264

        #4
        problem solved due to developer not seated properly...thanks for reply

        Comment

        • ck1
          Trusted Tech

          250+ Posts
          • Apr 2008
          • 485

          #5
          oh.... new information . thanks also...........

          Comment

          • copytech200X
            Trusted Tech

            250+ Posts
            • Apr 2009
            • 264

            #6
            after this problem happen, i always do one more steps is each times replace developer make sure insert drum cartridge and confirm smooth ...if any stuck half way do not try turn on machine and reinstall developer assy again.

            Comment

            Working...