Xerox 238

[linuxxpwin]

Wow interesting, I will try it however and let u know if it did work, but I prefer to have software and manuals thanks in advance bojans.

Linuxxpwin

[bojans]

Wow interesting, I will try it however and let u know if it did work, but I prefer to have software and manuals thanks in advance bojans.

Linuxxpwin

Sometime tomorrow I'll upload files and send you link.
BR

[bojans]

Check this!
DocumentSpeedMismatch.pdf

[linuxxpwin]

Does this pass work with all machines? Aren't you supposed to give machine serial number, and get back pass code?

I have been doing some reading and if I can get into 03-008, my setting should be 78 which is WC38BMF.

[linuxxpwin]

Check this!
[ATTACH]8338[/ATTACH]

Very interesting reading, I am very pleased with the info provided, I have been doing quite a lot of reading and I will post update tomorrow.

Thanks in advance.

[linuxxpwin]

Check this!
[ATTACH]8338[/ATTACH]

Ok gentle men

The passcode did work and I was able to change settings however problem persist, I then use the attachment reading provided by bojans and the final part did work by setting 08-001 of the IOT to 7 allowing the machine to configure it self.

I would still like to have relevant documentation on this machine (manuals, software, etc) and I am willing to make a donation to get them.

I am the only tech here covering a lot of these machine so I need all relavant resource available.

Thanks in advance
Linuxxpwin

[bojans]

Ok gentle men

The passcode did work and I was able to change settings however problem persist, I then use the attachment reading provided by bojans and the final part did work by setting 08-001 of the IOT to 7 allowing the machine to configure it self.

I would still like to have relevant documentation on this machine (manuals, software, etc) and I am willing to make a donation to get them.

I am the only tech here covering a lot of these machine so I need all relavant resource available.

Thanks in advance
Linuxxpwin

Glad to hear that everything is working now.

Send me your e-mail address, so I can share dropbox folder with you.

[linuxxpwin]

Ok I send you my email address check pm inbox.

Thanks again in advance.

[Guest]

No!

Only 2xx and 56xx series!

[a.ghafari]

Hi,

If you need the password to change some NVM link in DC 131 like machine speed use this:

(2845490).tel me if you use this and the problem is steel.