If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi, going to look at one of these tomorrow . fault is producing dark copies when using adf seems to be ok from glass
dont know xerox machines any pointers welcome.
May be very simple task to clean the mirrors from scanner assy. or a major defect of CCD board. In the last case need to change scanner assy or call a xerox tech to change CCD PWB and do proper aligniament and calibration.
Can anyone give me advice about putting one of these on contract? I usually dont work on these, so they are new to me. Knowing the risks do you think I would have big problems with it?
Can anyone give me advice about putting one of these on contract? I usually dont work on these, so they are new to me. Knowing the risks do you think I would have big problems with it?
Very reliable machines from my point of view. I just like them. It has Drum and Fuser modules. Easy to change. Maybe you sometimes have to reload Network Controller software and clean the optics, vacuum some spilled toner, that's almost all.
Comment