Error Code 016-214

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alan Aya

    #1

    Error Code 016-214

    Hi pal,
    Having this 016-214 error code after doing some cleaning up and dismantle of FAX board. Is the error appear because of the FAX board has been taken out? if it is, then how do i reset it without installing the FAX Board? Need to deliver the machine on Monday for rental.
    Any help would be much appreciated.

    Thank you.
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2376

    #2
    Re: Error Code 016-214

    It is a washing machine ?

    Comment

    • Alan Aya

      #3
      Re: Error Code 016-214

      Originally posted by adriansto
      It is a washing machine ?
      Sorry, my mistake its Document Centre 286.

      Comment

      • adriansto
        Service Manager

        Site Contributor
        VIP Subscriber
        1,000+ Posts
        • Nov 2007
        • 2376

        #4
        Re: Error Code 016-214

        Originally posted by Alan Aya
        Sorry, my mistake its Document Centre 286.
        Put the fax board at his place.

        Comment

        • jamesfoo

          #5
          Re: Error Code 016-214

          Originally posted by Alan Aya
          Hi pal,
          Having this 016-214 error code after doing some cleaning up and dismantle of FAX board. Is the error appear because of the FAX board has been taken out? if it is, then how do i reset it without installing the FAX Board? Need to deliver the machine on Monday for rental.
          Any help would be much appreciated.

          Thank you.

          Hi Alan,

          I have the same problems with the 016-214 and wish to remove Fax card, too. I saw this post of yours since a while ago for DC286.
          Do you mind to share your solution with me?

          Thanks a million.

          Comment

          • livewire
            Senior Tech

            500+ Posts
            • Sep 2011
            • 608

            #6
            Re: Error Code 016-214

            Try this:
            You must log in as admin from UI.
            Locate the entry menu of Software options.
            Enter:
            ClearAllFlag
            Select:
            Reboot


            Very Important:
            This procedure will erase all the options that are machine have.
            You need codes to enable the options again.


            Their own risk.

            Comment

            • jamesfoo

              #7
              Re: Error Code 016-214

              Thanks livewire.

              Comment

              Working...