Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

[ktxerox]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

HI All,
I am also stuck on subjected issue. can any one send me same firmware so i can load software through alboot or through software upgrade .

ktxerox@gmail.com


Thanks

[bojans]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

HI All,
I am also stuck on subjected issue. can any one send me same firmware so i can load software through alboot or through software upgrade .

ktxerox@gmail.com


Thanks

KT clear your inbox... I'm getting this message

• ktxerox has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

[ktxerox]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

Dear bojan I empty my inbox it was full.

You can mail me on ktxerox@gmail.com

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

Hello friends. I have both versions of machines (SBC and MBC). I'm trying to reload the software by inserting the USB pendrive with "ALTBOOT" folder which contained the files .dlm
on SBC machine it is loaded perfectly.
with mbc the machine does not recognize the pendrive.
how can I reload? thank you

P.S. basically, my problem is that in the network controller does not go over 75%.

[bojans]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

Enzo,
I believe you have to use your PWS laptop, start AltBoot program and reload software.
Also connect laptop and NC with ethernet cable and null modem cable.

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

Hello my friend. Unfortunately I have already tried to use my ALTBOOT but it does not work ! I securely can reload the nvm but not ALTBOOT program! That's why now I used the usb pendrive.
I need a method to reload the software!

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

dear friends, I need to change the hard drive to xerox 5645. how can I enter the data of the software? thank you

[pratik_shah]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

I need firmware for xerox 5655 - > 021.120.039.00000 and network dirmware too, to load with alterboot need (linux files and dlm for 5655) please send me on prats.ss@gmail.com

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

Hello friends. I still can not solve the problem of error of the network controller. it stuck the 75% loaded. I have the MBC version and I think I have all the files and the right software. you can describe step-by-step how to proceed with the recovery controller? thank you

[adriansto]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

What files do you have and what version of altboot you use.

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

What files do you have and what version of altboot you use.

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

I have perhaps problem in the connections?

[Phil B.]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

altboot is done via USB thumbdrive 2gb - 8gb format fat32

[Enzo]

Re: Looking for XEROX 5632/5638 5645/5655 and 5665/75/87 Firmware

no my friend, I have the MBC version so the thumbdrive not working

[xcopytech]

What version of altboot you have?
Do you have null modem cable?
Connect null modem cable to serial port on controller and on PC.
Also need cross over network cable.