missing network settings DCCS 50

[pimaxc]

Re: missing network settings DCCS 50

IMG_0440.JPGIMG_0441.JPG

IP Address is not listed in this menu.

[bojans]

Re: missing network settings DCCS 50

Did you set up these settings? Check it again. New value is confirmed with Start button
702-031 to 60
702-032 to 60
702-037 to 15
702-038 to 15

[pimaxc]

Re: missing network settings DCCS 50

yes, just double checked in the NVM Read/Write panel. I also double checked the other values you gave me. They are all correct

[bojans]

Re: missing network settings DCCS 50

Turn off machine and reseat all cables from cobra to machine.
If that doesn't solve problem maybe you have to reload Cobra software.

[pimaxc]

Re: missing network settings DCCS 50

Reseating the cables did not work.

[adriansto]

Re: missing network settings DCCS 50

700-099 to 1
702-031 to 60
702-032 to 60
702-037 to 15
702-038 to 15
710-062 to 0
710-063 to 0
715-125 to 1
749-030 to 1
752-001 to 3 =2 for northamerica
752-008 to 2 (2=copier/printer,4=printer only)
759-051 to 1
759-004 to 0
759-053 to 1
759-054 to 1
759-093 to 0
759-094 to 0
775-738 to 0
775-887 to 15
990-302 to 0

These are the nvm settings for Cobra1 controller for RX european market

[pimaxc]

Re: missing network settings DCCS 50

That fixed it, thank you both soo much. I'll make sure to ask here first if I have any other issues crop up.

[bojans]

Re: missing network settings DCCS 50

Adi thanks for jumping in.
I was out of ideas

[adriansto]

Re: missing network settings DCCS 50

Welcome !