xerox workcentre 5655 configuration change

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • seansbar
    replied
    Re: xerox workcentre 5655 configuration change

    Yes, It depends on what controller is in the machine.

    For single board controller, log in as admin, disable all networking protocols, (TCP/IP v4, TCP/IP v6, netware...). It will still boot network controller, but wont give you message about network cable unplugged.

    For Multi-board controllers, unplug the NC and take out the firewire card out of the tray, instantly no printing capabilities.

    Leave a comment:


  • mrfuser
    started a topic xerox workcentre 5655 configuration change

    xerox workcentre 5655 configuration change

    Is there a way to change the configuration to just copier, not copier, printer on these wiworkcentre systems?

    We don't want it to try to boot up controller for print.

    Thanks all
    Kelly
Working...