Re: Xerox WCP 245 controler died
Screenshot
-
Re: Xerox WCP 245 controler died
I had that message once but can't remember what was the cause. Maybe you use wrong version of AltBoot.
Check your PM.Leave a comment:
-
Re: Xerox WCP 245 controler died
Thanks for reply.
Is the documentation and altboot for DC555 is compatible with WC 245?First set up proper IP address. (Check in documentation)
The documentation for DC 555 doesn't say anything about IP address. What IP should I set?
I have all the stuff for DC555 including documentations and cables.You need serial and crossover cable and proper files for altboot.
And I have only D132724000_00_1.DLM I think its for WC 245. That is only I have. Do I need anything more?Choose option 2 Download Linux Netboot Image
I don't see any window, only :You should now see Download Request appear in the status bar at the bottom left. A file open window will then appear.
PHP Code:PWS BOOT MENU ================================ 1) Return to Main Menu 2) Download Linux Netboot Image ================================ Selection:[1] => 2 UNDI INITIALIZE Failure PXE - UNDI MEDIA TEST FAILED Press Any Key to ContinueLeave a comment:
-
Re: Xerox WCP 245 controler died
You need serial and crossover cable and proper files for altboot.
First set up proper IP address. (Check in documentation)
Power on NC with cables connected to PWS.
Press any key for AltBoot Menu.
Choose option 2 PWS Boot, after that
Choose option 2 Download Linux Netboot Image
You should now see Download Request appear in the status bar at the bottom left. A file open window will then appear.
You should enter the ‘Filename’ box or use the browse button to select the Linux Kernel file.
Select Open button. The transfer progress dialog is displayed.
If the transfer completes successfully the Transfer dialog will close automatically and another File Open window is displayed.
You must enter in the ‘Filename’ box or use the Browse button to select the Linux Root File System File.
And after that just follow installation...Leave a comment:
-
Re: Xerox WCP 245 controler died
Somehow after many times turn on and off the power, and reconnect all the stuff I can even reconnect the controller tries to be alive.
I need to reinstall the system software, but I don't know how. It looks different to compare with Xerox DC 555.
Here is a log file:
PHP Code:***************************************************************************************************** Xerox Document Centre 555/545/535 AlternateBoot Log File. Wednesday, August 29, 2012 13:16:44 ***************************************************************************************************** ґяS[0m[2;30;40m[01;00H [02;00H [03;00H [04;00H [05;00H;37;40mBIOS Date: 05/20/05 22:14:04 Ver: 08.00.08 [06;00H [07;00Hca BIOS v7.04 [08;00H [09;00Hca Jumperless Front Side Bus Support v1.00.07 [10;00Hca SMBUS Clock Generator Control v1.00.05 [11;00Hca HDD Spinup Module v1.00.02 [12;00Hobile AMD Duron(tm) [13;00H: 1.00 GHz [14;00H [15;00HSpeed: 266MHz, Size: 256MB, Located at: DIMM1 DIMM2 [16;00H00A North Controller C3 [17;00H237 South Controller, Rev A9 [18;00Hg NVRAM.. [19;00HK [20;00Hizing USB Controllers .. Done. [21;00HEL to run Setup (F4 on Remote Keyboard) [22;00H11 for BBS POPUP (F3 on Remote Keyboard)003-Y2KC [23;00H [24;00Hel to enter setup (if required) Now. 3 [24;00Hel to enter setup (if required) Now. 2 [24;00Hel to enter setup (if required) Now. 1 [05;00H [06;00Hca BIOS v7.04 [07;00H [08;00Hca Jumperless Front Side Bus Support v1.00.07 [09;00Hca HDD SD Duron(tm) [10;00Hg NVRAM. [11;00H [12;00H [13;00H ve Present,ID Device Incomplet[0m[1;36;47m[0m[1;32;40m****************[14;00H****************************************************************************[15;00H*************************************************************************[16;00H*************************************************************************[17;00H*************************************************************************[18;00H*************************************************************************[19;00H*************************************************************************[20;00H*************************************************************************[21;00H*************************************************************************[22;00H*************************************************************************[23;00H*************************************************************************[24;00H************************************************************************[01;00H*************************************************************************[02;00H*************************************************************************[03;00H*************************************************************************[04;00H*************************************************************************[05;00H*************************************************************************[06;00H*************************************************************************[07;00H*************************************************************************[08;00H*************************************************************************[09;00H*************************************************************************[10;00H*************************************************************************[11;00H*************************************************************************[12;00H*************************************************************************[13;00H*************************************************************************[01;00H;30;40m [02;00H [0m[1;32;40m********************[01;00H*************************************************************************[02;00H*************************************************************************[01;00H;30;40m [02;00H [03;00H [04;00H [05;00H;37;40m256MB OK [06;00H [07;00H [08;00H [09;00H [10;00H [11;00H [12;00H Master ATA HDD Drive Present,ID D but Drive Absent [13;00Hry Master ATA HDD Conccc Xerox User Flash Firmware ================================ ALTERNATE BOOT Ver 4.0 ================================ System ID => Xerox Denali v1.00 Bios ID => American Megatrends Inc. 0704 05/20/2005 Board ID => Celestica Denali P2 CMYI32533011031 uP ID => AMD mobile AMD Duron(tm) 01000 MHz Main Revision => 4.1.2 ================================ Press Any Key For AltBoot Menu (05) :(04) :(03) :(02) : ================================ ALTERNATE BOOT Ver 4.0 ================================ System ID => Xerox Denali v1.00 Bios ID => American Megatrends Inc. 0704 05/20/2005 Board ID => Celestica Denali P2 CMYI32533011031 uP ID => AMD mobile AMD Duron(tm) 01000 MHz Main Revision => 4.1.2 ================================ MAIN MENU ================================ 1) Continue Boot-Up 2) PWS Boot 3) Diagnostic Menu 4) Reboot System ================================ Selection:[1] => 2 ================================ ALTERNATE BOOT Ver 4.0 ================================ System ID => Xerox Denali v1.00 Bios ID => American Megatrends Inc. 0704 05/20/2005 Board ID => Celestica Denali P2 CMYI32533011031 uP ID => AMD mobile AMD Duron(tm) 01000 MHz Main Revision => 4.1.2 ================================ PWS BOOT MENU ================================ 1) Return to Main Menu 2) Download Linux Netboot Image ================================ Selection:[1] => 2 UNDI INITIALIZE Failure PXE - UNDI MEDIA TEST FAILED Press Any Key to Continue ================================ ALTERNATE BOOT Ver 4.0 ================================ System ID => Xerox Denali v1.00 Bios ID => American Megatrends Inc. 0704 05/20/2005 Board ID => Celestica Denali P2 CMYI32533011031 uP ID => AMD mobile AMD Duron(tm) 01000 MHz Main Revision => 4.1.2 ================================ PWS BOOT MENU ================================ 1) Return to Main Menu 2) Download Linux Netboot Image ================================ Selection:[1] => 1 ================================ ALTERNATE BOOT Ver 4.0 ================================ System ID => Xerox Denali v1.00 Bios ID => American Megatrends Inc. 0704 05/20/2005 Board ID => Celestica Denali P2 CMYI32533011031 uP ID => AMD mobile AMD Duron(tm) 01000 MHz Main Revision => 4.1.2 ================================ MAIN MENU ================================ 1) Continue Boot-Up 2) PWS Boot 3) Diagnostic Menu 4) Reboot System ================================ Selection:[1] => 1 but Drive Abse [14;00H [15;00H [16;00H [17;00H [0m[1;36;47m[0m[1;32;40mLeave a comment:
-
Xerox WCP 245 controler died
Hello.
I cant manage to repair the Xerox WCP 245 controler. It doesnt turn on. The power supply works ok! When I connect power cable, nothing happend. It looks like there is no power. When I close the wire , see the picture
20120827_200532.jpg
fans start operate but, after release they stop.
That's it.
Thanks
Leave a comment: