If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I copied single colours and tried a brand new fuser, but the marks were still there.
Where is the option to print at 20% please?
Originally posted by bojans
Print every color CMYK at 20% separately and you'll see if it's one of drums.
If it's on every color stop the print before fuser and inspect it. If it's not there that's the fuser problem.
Comment