Xerox 7830 Breaker switch tripping

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ATurner123
    • Jun 2025
    #1

    [Dead] Xerox 7830 Breaker switch tripping

    Hi, I have a xerox WC 7830 that keeps tripping the GFI breaker switch on the rear intermittley. Firmware has been upgraded. I'm going down the road of replacing the main LVPS on the device. Has anyone had this problem or simular, Any info would be great. Thanks
    Tags: None
    • InterfaceP
      Trusted Tech

      250+ Posts
      • Jun 2013
      • 488
      #2
      Re: Xerox 7830 Breaker switch tripping

      What is the required amperage for the 7830?

      How may amps are coming out of the wall? Look at the breaker panel and verify the amps (#on the switch) isn't higher than that required by the printer.

        Comment

        • ATurner123
          #3
          Re: Xerox 7830 Breaker switch tripping

          Originally posted by InterfaceP
          What is the required amperage for the 7830?

          How may amps are coming out of the wall? Look at the breaker panel and verify the amps (#on the switch) isn't higher than that required by the printer.

          Plug and socket have both been checked, 13 Amp fuse replaced, different socket also used. Still trips every 3/4 hrs.

          Cheers

            Comment

            Previous template Next
            Working...