Gr1700 manual/ gr1700 master feed problem

[daniboi]

I need a GR1700 MANUAL, I really appreciate much of any help.

[RRodgers]

For master feed problems check and be sure that they alin screw for the write roller didn't back out. It's right under the control panel and just above the power supply (if I remember right) Also be sure that there are not cut masters stuck in the master feed section. I usually grab and piece of card stock and force it threw the master's "paper path" That will clear out anything that is stuck in there.
HTH

[daniboi]

I'm sure there's no cut masters on the path I had checked it out. Maybe the allen screw for the write roller is loose, I'll check it out. Thanks a lot, and please be there like an angel for some follow ups. Thanks again RRodgers.


daniboi

[albasoul06]

attached

---------------

[daniboi]

The Manual

Pay no heed to the manuals4you spammer. He knows not his place in life and is merely trying to rip you off with STOLEN and likely outdated manuals (and possibly a virus from that download), all the while completely ignoring the fact that you already have manuals.

My dear albasoul06,
I don't know how can I say the word THANK YOU in a different way to show appreciation to this gift you send me. I wish I can help others too, so that I can ( in any way) pay you and have that chain continue forever.
daniboi