[Error Code] Riso EZ370 error code

[bcp]

Anyone know what P-04-513 error code is & how to fix? thanks

[laitang]

Re: Riso EZ370 error code

The overflow sensor is ON for a set number of times in succession during the 10-millisecond interval overflow-sensor check.
Press Reset Key after correcting the ink overflow condition. (No ink on the ink overflow sensor.)

RZ-370_Overflow_sensor.JPG

[jermyth]

Re: Riso EZ370 error code

If the reset doesn't work there can be two causes for the code. Primary cause is the one-way squeegee gear is slipping, needs replaced by a RISO tech. Second cause is dry ink on ink bead stuck on the overflow sensor. I've seen this happen several times with color drums, especially red & bright red. Something about RISO's red pigments has given me more problems then its worth.
Good luck.

[bcp]

Re: Riso EZ370 error code

thanks for quick reply. I guess that the sensor just needs cleaning. Is there any info on how to get into the drum? thanks

[jermyth]

Re: Riso EZ370 error code

Get a manual. See Paul with Justmanuals.com he advertises on here.
There is a "window" that can be opened inside the ink tube holder that can give one limited access to the ink sensors.
Good luck.

[Azarov]

Re: Riso EZ370 error code

Usually, the occurrence of this error is due to the poor quality or ink or wear clutch shaft inside the drum.