Is there a reset procedure for the replace fuser unit code that comes up on the machine? If so what is it? Any help appreciated, thank you.
-
-
Wow. This was buried on pg IV-33 of the service manual.
If you remove and reinstall the heat-fixing unit because of any failure, make the equipment
enter the maintenance mode (by pressing the Function/Menu, * 2, 8, 6, and 4 keys) after
completion of reassembly and then make it exit from the mode (by pressing the 9 key twice).
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment