designjet Z3200 carriage Part #

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • theengel
    Service Manager

    1,000+ Posts
    • Nov 2011
    • 1784
    #1

    designjet Z3200 carriage Part #

    In the manual, I see a lot of different part numbers for the carriages between the Z2100, Z3100, Z3200, etc.,.

    I'm working on a 24" Z3200, and the part number for that carriage is Q6718-67012.

    Someone's got part #Q6718-60004 listed on ebay for fitting all the above. Will this work for the Z3200?
    Tags: None
    • Kiran Otter
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Dec 2013
      • 1106
      #2
      Re: designjet Z3200 carriage Part #

      Originally posted by theengel
      In the manual, I see a lot of different part numbers for the carriages between the Z2100, Z3100, Z3200, etc.,.

      I'm working on a 24" Z3200, and the part number for that carriage is Q6718-67012.

      Someone's got part #Q6718-60004 listed on ebay for fitting all the above. Will this work for the Z3200?
      Q6718-67012 was replaced by Q6718-67032 when they changed the trailing cable design; now the carriage and trailing cable come together. $1357.

      I don't know what a Q6718-60004 is; they probably took some sub-assembly part number off the carriage for the listing. If it's the listing I found (there only seems to be one) it appears to be the carriage with the trailing cable, pulled from a machine. You might luck out with that.

      Kiran

        Comment

        Previous template Next
        Working...