So T2300 cant iniitalize one of three printhead after instalation. Carriage PCA has changed. I tried with two new printhead. Any suggestion?
-
-
Re: HP DESIGNJET T2300 cant initialize new printhead
Carriage PCA changed? Sounds like it's either bad, or the flex cables were not connected correctly, or were damaged. I'd still try one more new printhead though. Having two bad printheads isn't impossible.
Why was the carriage PCA changed?
Kiran -
Re: HP DESIGNJET T2300 cant initialize new printhead
Do you get an error message? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: HP DESIGNJET T2300 cant initialize new printhead
No error. Changed all three printhead and now it is ok.Comment
Comment