film fuser Hp M129

[Phil B.]

Re: film fuser Hp M129

hi
no the problem is just after the change of the film fuser

after some technician in hp M102 the problem appear just after the change of fuser film (but thy want share the solution )

If it was after changing the film then fit a new fuser and be done with it.

Sent from my SM-G960U using Tapatalk

[Lance15]

Re: film fuser Hp M129

Could be a faulty image drum.

HP 19A Original LaserJet Imaging Drum - CF219A

[issambass]

Re: film fuser Hp M129

hi
no the problem is just after the change of the film fuser

after some technician in hp M102 the problem appear just after the change of fuser film (but thy want share the solution )

[Phil B.]

Re: film fuser Hp M129

Hi everybody

i have changer the film fuser of HP LaserJet M129 but i have problem in printed pages

bests[ATTACH=CONFIG]49175[/ATTACH]

1) that doesn't appear to be fuser related it looks more like toner cart or transfer or a dirty laser.
2) are they using Genuine OEM HP toner carts or some ' turd party' crap toner?
3) re: fuser film.. did you just replace the film or the whole fusing unit?

I would suggest cleaning the unit COMPLETELY ... laser lens .. transfer..

IF you do a stop test does the image appear complete on the drum or does it display the same problem ( IF YES clean the laser lens again.. )

[issambass]

Hi everybody

i have changer the film fuser of HP LaserJet M129 but i have problem in printed pages

bestsWhatsApp Image 2021-05-17 at 11.47.41.jpg