Designjet t2300 front panel swap

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • D Hook
    Trusted Tech

    100+ Posts
    • Mar 2018
    • 205
    #1

    Designjet t2300 front panel swap

    I need to replace the front panel on my T2300PS because the image is faded and almost impossible to read. But I've read that swapping in a used panel can cause problems and generate a 59:0.3 error. Part numbers are the same but don't want to muck something up. I've already updated the firmware to the latest from the Hp website. Any experience or problems I should look out for?
    Thanks
    Last edited by D Hook; 05-24-2024, 04:14 PM.
    Tags: None
    • D Hook
      Trusted Tech

      100+ Posts
      • Mar 2018
      • 205
      #2
      I went on the LPS Computers website and it looks like they sell a kit that includes a used touch screen, new hard drive and roller encoder sensor for about $200. I guess that all has to be replaced at the same time?
      HP Designjet T790, T795, T1300, T2300 Touch Screen Control Panel
      https://www.lpscomputer.com/products/cn727-67019-designjet-t790-t1300-t2300-touch-screen-control-panel?_pos=3&_sid=1fc744885&_ss=r&variant=36321246511256
      Replacement Touch Screen for the Designjet T2300, T1300, T790 and T795 plotters. This part fits all sizes. In stock in USA. Same day shipping.

        Comment

        • Kiran Otter
          Service Manager

          Site Contributor
          1,000+ Posts
          • Dec 2013
          • 1100
          #3
          That does appear to be the case. I appreciate LPS figuring that one out.

          Kiran

            Comment

            Previous template Next
            Working...