T830 uneven color bands

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bigdaddyooo
    Trusted Tech

    Site Contributor
    100+ Posts
    • Dec 2014
    • 211
    #1

    T830 uneven color bands

    It seems the internal prints look great. Tried with my laptop and xover cable, same banding. I have replace printheads and mainboard. I have also updated the firmware. Im enclosing a sample print. Notice the green which it seems to have the most issues with.
    Last edited by bigdaddyooo; 6 days ago.
    Are you the police? "No ma'am, were musicians"
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22922
      #2
      Where is that sample print?
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • bigdaddyooo
          Trusted Tech

          Site Contributor
          100+ Posts
          • Dec 2014
          • 211
          #3
          I can see it. lol let me redo the post
          Are you the police? "No ma'am, were musicians"

            Comment

            • bigdaddyooo
              Trusted Tech

              Site Contributor
              100+ Posts
              • Dec 2014
              • 211
              #4
              T830.jpg sample
              Last edited by bigdaddyooo; 6 days ago.
              Are you the police? "No ma'am, were musicians"

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22922
                  #5
                  If you do a printhead alignment print, it will be easier to see which colors are involved. Or something like this:
                  Attached Files
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • bigdaddyooo
                      Trusted Tech

                      Site Contributor
                      100+ Posts
                      • Dec 2014
                      • 211
                      #6
                      This is the print from the machineIMG_2940.jpg
                      Are you the police? "No ma'am, were musicians"

                        Comment

                        • bigdaddyooo
                          Trusted Tech

                          Site Contributor
                          100+ Posts
                          • Dec 2014
                          • 211
                          #7
                          UPDATE.. I found out HP did an update and rendered the driver into "FAST" mode. I switched to "best" and viola....perfect. ty for thr help
                          Are you the police? "No ma'am, were musicians"
                            👍 1

                            Comment

                            • Kiran Otter
                              Service Manager

                              Site Contributor
                              1,000+ Posts
                              • Dec 2013
                              • 1100
                              #8
                              Yes, fast mode will cause exactly that effect. I'm glad you found the solution.

                              Kiran

                                Comment

                                Previous template Next
                                Working...