Hi everyone,
I have an HP Color Laser Jet CP3525dn on the bench that is throwing a 59.F0 error code. I have replaced the fuser drive unit, and the DC Controller board. I've tested various paper path sensors, and have verified they're all working. I removed the fuser drive solenoid, and removed the foam pad that cushions the arm of the solenoid, cleaned the area (both sides) with alcohol and applied a layer of electricians tape underneath the arm of the solenoid. I've checked that all gears, in the fuser drive unit, are aligned properly, as well. After all this, the 59.F0 error code returns.
Could anyone possibly shed some light on this one for me?
Thanks heaps!
I have an HP Color Laser Jet CP3525dn on the bench that is throwing a 59.F0 error code. I have replaced the fuser drive unit, and the DC Controller board. I've tested various paper path sensors, and have verified they're all working. I removed the fuser drive solenoid, and removed the foam pad that cushions the arm of the solenoid, cleaned the area (both sides) with alcohol and applied a layer of electricians tape underneath the arm of the solenoid. I've checked that all gears, in the fuser drive unit, are aligned properly, as well. After all this, the 59.F0 error code returns.
Could anyone possibly shed some light on this one for me?
Thanks heaps!
Comment