T520 error 59.2:19 with used Main PCA

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • i-have-fax-problems
    Technician

    50+ Posts
    • Mar 2020
    • 98
    #1

    T520 error 59.2:19 with used Main PCA

    I have a T520 which can't be switched on. MainPCA (Main Board) is broken.
    With a used one, I can switch it on but then error 59.2.19 occurs (because of the used board)
    I've resetted the main board (NVRam Reset) but same error.
    Does anyone know any trick, so you can use a used board in this device.
    Tags: board, error, main, resetted, t520
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      Re: T520 error 59.2:19 with used Main PCA

      If Hytec repairs these boards, I think I would send it into Hytec to get the PWB initialized, so it's ready for the installation procedure. That's the only suggestion that I have. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • wav
          Trusted Tech

          Site Contributor
          250+ Posts
          • Oct 2021
          • 281
          #3
          Re: T520 error 59.2:19 with used Main PCA

          i have a t520 usb drive image see if that will allow it to boot with the other board.

            Comment

            • BULLDOGG
              Junior Member

              Site Contributor
              • Dec 2023
              • 2
              #4
              Re: T520 error 59.2:19 with used Main PCA

              Originally posted by wav
              i have a t520 usb drive image see if that will allow it to boot with the other board.
              I bought a used board. Suppose to be for a T520 but shows up as a T120 in PC devices. Would your image fix my issue?

                Comment

                • wav
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Oct 2021
                  • 281
                  #5
                  Re: T520 error 59.2:19 with used Main PCA

                  It may work.
                  If you pm me your email or something I'll send it over

                    Comment

                    • wav
                      Trusted Tech

                      Site Contributor
                      250+ Posts
                      • Oct 2021
                      • 281
                      #6
                      Re: T520 error 59.2:19 with used Main PCA

                      Also I do see that you have not a contributed to the forum.

                        Comment

                        • BULLDOGG
                          Junior Member

                          Site Contributor
                          • Dec 2023
                          • 2
                          #7
                          Re: T520 error 59.2:19 with used Main PCA

                          Originally posted by wav
                          Also I do see that you have not a contributed to the forum.

                          I'm a contributor now.

                            Comment

                            Previous template Next
                            Working...