If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
"Splotches"/uniformity problem with cyan since changing cartridges
Re: "Splotches"/uniformity problem with cyan since changing cartridges
Why you're all bothering to respond to this moron is beyond me, since he doesn't take any advice anyhow. But if you all give him conflicting advice, the thread would be much funnier.
Re: "Splotches"/uniformity problem with cyan since changing cartridges
Originally posted by manuals4you
Why you're all bothering to respond to this moron is beyond me, since he doesn't take any advice anyhow. But if you all give him conflicting advice, the thread would be much funnier.
Re: "Splotches"/uniformity problem with cyan since changing cartridges
Originally posted by Wild Bill
Why dont we have a specific room for morons
Because morons are unable to identify themselves to choose the correct forum. It's quite a problem. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Re: "Splotches"/uniformity problem with cyan since changing cartridges
He already asked to be removed from this forum. I think the administrator should grant his request.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Re: "Splotches"/uniformity problem with cyan since changing cartridges
My personal stance on compatible toner:
It's okay to buy and use it as long as:
- You understand that things can go wrong;
- If things do indeed go wrong, don't come to me - go to your toner supplier and sort it out with him;
- If you call me to repair your machine - under contract or not - and the problem was caused by some toner we didn't sell, I will bill you. Afterwards, check point above.
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Re: "Splotches"/uniformity problem with cyan since changing cartridges
Originally posted by mrwho
My personal stance on compatible toner:
It's okay to buy and use it as long as:
- You understand that things can go wrong;
- If things do indeed go wrong, don't come to me - go to your toner supplier and sort it out with him;
- If you call me to repair your machine - under contract or not - and the problem was caused by some toner we didn't sell, I will bill you. Afterwards, check point above.
MrWho, trust me, you are wasting your time with this troll. He wants to be the life of the party, but instead, he's the guy who sucks all the fun out of the room. Trust me, we are all tired of hearing from him since he never listens to the answers from technicians who know more about machines in their little finger than he'll ever know about life. I would rather answer a newbie dumb question because at least they can learn and we've all been there before. This guy doesn't have enough brain to know how to rub two sticks together and he wants to argue when we give him answers, because it's not what he wants to hear. He wants everyone to tell him how to print for free by using colored toilet water in an inkjet and lord knows what he wants to put in a laser.
I would rather read and answer zaza's posts all day long, because at least they're fun and he is trying to learn. Not like this moron who only wants to fight and remain ignorant.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Re: "Splotches"/uniformity problem with cyan since changing cartridges
Originally posted by prntrfxr
MrWho, trust me, you are wasting your time with this troll. He wants to be the life of the party, but instead, he's the guy who sucks all the fun out of the room. Trust me, we are all tired of hearing from him since he never listens to the answers from technicians who know more about machines in their little finger than he'll ever know about life. I would rather answer a newbie dumb question because at least they can learn and we've all been there before. This guy doesn't have enough brain to know how to rub two sticks together and he wants to argue when we give him answers, because it's not what he wants to hear. He wants everyone to tell him how to print for free by using colored toilet water in an inkjet and lord knows what he wants to put in a laser.
Dear Prntrfxr, trust me, I know who I'm dealing with. I just don't agree with you when you say he sucks all the fun out of the room - to me, he's a breath of fresh air onto this forum or, probably a more fitting comparison, the jester of the court.
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Comment