"Splotches"/uniformity problem with cyan since changing cartridges

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wild Bill
    Senior Tech

    500+ Posts
    • Jul 2005
    • 774

    #16
    Re: "Splotches"/uniformity problem with cyan since changing cartridges

    OMG Change the dam toner Cartridge! KISS Keep it simple stupid
    Izzy

    Comment

    • Brian8506
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2009
      • 1664

      #17
      Re: "Splotches"/uniformity problem with cyan since changing cartridges

      Or go back to inkjet that you said cost next to nothing to operate. Or get a different color kayak.

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #18
        Re: "Splotches"/uniformity problem with cyan since changing cartridges

        Why you're all bothering to respond to this moron is beyond me, since he doesn't take any advice anyhow. But if you all give him conflicting advice, the thread would be much funnier.

        Paul@justmanuals.com

        Comment

        • jonezy999
          just one copy??

          Site Contributor
          500+ Posts
          • Feb 2010
          • 952

          #19
          Re: "Splotches"/uniformity problem with cyan since changing cartridges

          Originally posted by manuals4you
          Why you're all bothering to respond to this moron is beyond me, since he doesn't take any advice anyhow. But if you all give him conflicting advice, the thread would be much funnier.

          Paul@justmanuals.com
          I recommend all my customers buy their own compatible toners, the cheaper the better. Especially machines that have toner covered under contract.
          I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison

          Comment

          • Wild Bill
            Senior Tech

            500+ Posts
            • Jul 2005
            • 774

            #20
            Re: "Splotches"/uniformity problem with cyan since changing cartridges

            Why dont we have a specific room for morons
            Izzy

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999

              #21
              Re: "Splotches"/uniformity problem with cyan since changing cartridges

              Originally posted by Wild Bill
              Why dont we have a specific room for morons
              Because morons are unable to identify themselves to choose the correct forum. It's quite a problem. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

              Comment

              • jonezy999
                just one copy??

                Site Contributor
                500+ Posts
                • Feb 2010
                • 952

                #22
                Re: "Splotches"/uniformity problem with cyan since changing cartridges

                Hi, I'm here for the moron forum.

                I applied for a job as a policeman, but they said I was over-qualified when I arrived at the correct building on time.
                Last edited by jonezy999; 06-27-2012, 07:36 AM.
                I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison

                Comment

                • prntrfxr
                  Service Manager

                  1,000+ Posts
                  • Apr 2008
                  • 1622

                  #23
                  Re: "Splotches"/uniformity problem with cyan since changing cartridges

                  He already asked to be removed from this forum. I think the administrator should grant his request.
                  Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

                  Comment

                  • mrwho
                    Major Asshole!

                    Site Contributor
                    2,500+ Posts
                    • Apr 2009
                    • 4299

                    #24
                    Re: "Splotches"/uniformity problem with cyan since changing cartridges

                    My personal stance on compatible toner:

                    It's okay to buy and use it as long as:

                    - You understand that things can go wrong;
                    - If things do indeed go wrong, don't come to me - go to your toner supplier and sort it out with him;
                    - If you call me to repair your machine - under contract or not - and the problem was caused by some toner we didn't sell, I will bill you. Afterwards, check point above.
                    ' "But the salesman said . . ." The salesman's an asshole!'
                    Mascan42

                    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

                    Ibid

                    I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    • prntrfxr
                      Service Manager

                      1,000+ Posts
                      • Apr 2008
                      • 1622

                      #25
                      Re: "Splotches"/uniformity problem with cyan since changing cartridges

                      Originally posted by mrwho
                      My personal stance on compatible toner:

                      It's okay to buy and use it as long as:

                      - You understand that things can go wrong;
                      - If things do indeed go wrong, don't come to me - go to your toner supplier and sort it out with him;
                      - If you call me to repair your machine - under contract or not - and the problem was caused by some toner we didn't sell, I will bill you. Afterwards, check point above.
                      MrWho, trust me, you are wasting your time with this troll. He wants to be the life of the party, but instead, he's the guy who sucks all the fun out of the room. Trust me, we are all tired of hearing from him since he never listens to the answers from technicians who know more about machines in their little finger than he'll ever know about life. I would rather answer a newbie dumb question because at least they can learn and we've all been there before. This guy doesn't have enough brain to know how to rub two sticks together and he wants to argue when we give him answers, because it's not what he wants to hear. He wants everyone to tell him how to print for free by using colored toilet water in an inkjet and lord knows what he wants to put in a laser.

                      I would rather read and answer zaza's posts all day long, because at least they're fun and he is trying to learn. Not like this moron who only wants to fight and remain ignorant.
                      Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

                      Comment

                      • mrwho
                        Major Asshole!

                        Site Contributor
                        2,500+ Posts
                        • Apr 2009
                        • 4299

                        #26
                        Re: "Splotches"/uniformity problem with cyan since changing cartridges

                        Originally posted by prntrfxr
                        MrWho, trust me, you are wasting your time with this troll. He wants to be the life of the party, but instead, he's the guy who sucks all the fun out of the room. Trust me, we are all tired of hearing from him since he never listens to the answers from technicians who know more about machines in their little finger than he'll ever know about life. I would rather answer a newbie dumb question because at least they can learn and we've all been there before. This guy doesn't have enough brain to know how to rub two sticks together and he wants to argue when we give him answers, because it's not what he wants to hear. He wants everyone to tell him how to print for free by using colored toilet water in an inkjet and lord knows what he wants to put in a laser.
                        Dear Prntrfxr, trust me, I know who I'm dealing with. I just don't agree with you when you say he sucks all the fun out of the room - to me, he's a breath of fresh air onto this forum or, probably a more fitting comparison, the jester of the court.
                        ' "But the salesman said . . ." The salesman's an asshole!'
                        Mascan42

                        'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

                        Ibid

                        I'm just an ex-tech lurking around and spreading disinformation!

                        Comment

                        • kingpd@businessprints.net
                          Senior Tech

                          500+ Posts
                          • Feb 2008
                          • 921

                          #27
                          Re: "Splotches"/uniformity problem with cyan since changing cartridges

                          Speaking of ZAZA, I miss him too...is he still around?

                          Comment

                          Working...